The sticky pad is composed of multiple layers of polyethylene films, each layer is attached with a high-viscosity coating, which is smooth and durable, and can quickly and effectively remove dirt and dust from the soles of the shoes, so as to keep the working environment clean. It is widely used in dust-free clean areas, and is placed at the entrance and exit of the clean room. It is the first dust-proof "guardian" of the clean room.

So how to use the sticky pad to play the role of the sticky pad? The following is the correct use of sticky pads and precautions.

1. When using the sticky dust pad, first tear off the protective layer of the adhesive surface from the opening on the back, and then stick it flat on the floor that comes in and out. The ground must be dry and there should be no water marks.

2. After pasting, use the sole to flatten the sticky pad on the ground, and then tear off the protective layer on the surface of the sticky pad from the opening on the front.

3. After the surface of the film is covered with dust during use, the viscosity of the sticky pad will decrease. At this time, it is necessary to tear off this layer of sticky pad. It is also important to tear off the sticky pad. The four corners of the dust pad are slowly separated from the pad, then move closer to the middle, wrap the dust inside, and fold the film inward until it is small enough to be discarded. This will ensure that the contaminants attached to the dust pad are not Fly everywhere to ensure the dust removal effect.

The sticky dust pad has strong stickiness, does not drop glue, can be used more than 100 times, and is easy to replace, without mopping or washing, and the shelf life is as long as 1 to 3 years. If you are interested in sticky dust pads, please contact KYD.