Specification:
Model No.: KYD-CR0902
Color: yellow, blue, black, green
Size: 8mm, 12mm, 16mm, 24mm tape, length 40mm
Packing: 8mm is 500pcs/box, 12mm is 500pcs/box, 16mm is 500pcs/box, 24mm is 250pcs/box
The SMT double-sided tape adopts the two sides of the receiving tape and the row of holes of the tape to completely correspond, so that the yellow tape is completely corresponding to the film on the tape, thereby being pasted.
SMT technology compresses traditional electronic components into devices that are only a few tenths of a volume, enabling high-density, high-reliability, miniaturization, low-cost, and automated production of electronic products. This miniaturized component is called: SMY device (or SMC, chip device). The process of assembling components onto a printed or other substrate is referred to as an SMT process. The associated assembly equipment is called an SMT equipment. Advanced electronic products, especially in computer and communication electronics, have generally adopted SMT technology. The output of SMD devices has increased year by year, while the output of traditional devices has been declining year by year, so SMT technology has become more and more popular over time. It is a popular technology and process in the electronics assembly industry.
Application: SIMENS, YAMAHA, PHILIPS, SAMSUNG, JUKI, etc. The machine can be used without stopping the machine, intermittent use or bulk material.
Instructions for use: peel off the base paper of the raised surface of the dot, and seal the SMT component with the sealing sleeve at the position of the convex spot of the dot, so that a film is attached to the SMT component tape. The center line of the base surface is folded in half. Bond the other side of the SMT component. Then remove the substrate and press the upper and lower film, the component tape is connected.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
