Features of FX-888D soldering station:
1. Heater core power 65W: The output power is increased by 30%, and the heat transfer speed greatly improves the welding efficiency.
2. Correction mode - Correcting temperature is simple and easy: traditional soldering station needs careful adjustment (CAL) knob to set the temperature and the actual temperature error of the tip. FX-888D soldering station can complete the correction temperature by inputting the actual temperature of the tip. .
3. Preset mode: 5 frequently used temperatures can be preset, and the required soldering temperature can be called up with the push of a button.
4. Digital adjustment, password lock temperature: Digital display, you can adjust the temperature every 1•C unit, and you can set the password to lock the temperature.
5. Two simple operation buttons: Only 2 buttons, UP (select) and ENEIR (decision) can be operated in all directions.
6. Use T18 series welding nozzle: Separate design of welding nozzle and heating element, saving operating cost, more than 30 types of welding tips are available.
FX-888D soldering station parameters:
Power consumption: 70W
Output voltage: AC26V
Temperature control range: 200-480•C
Temperature stability: +-1•C when no load
External dimensions: 100 (W) * 120 (H) * 120 (D) MM
Weight (excluding wires): 1.2KG
FX-8801 soldering iron:
Power consumption: 65W (26V)
Impedance between tip and ground: <2 ohms Potential between tip and ground: <2mv
Standard soldering tip: T18-B
Heating element: ceramic heating element
Full length (excluding wires): 217MM (when T18-B soldering tip is attached)
Weight (excluding wires): 46G (when T18-B soldering tip is attached)